700 and 700i Wall Guards
700 Wall Guard
Specification
Height: 196mm
Depth: 26mm
Length: 3.66m
Accessories
End Cap: 701 (Universal)
Outside Corner: 702 (90°)
Inside Corner: 707 (90°)
Spacer: 1601
Splice Support: 706
Gradus InPro 700 wall guard comprises a continuous aluminium retainer, internal impact bumper, impact-resistant PVC-u cover and complementary PVC-u accessories including end caps and corners.
The 700 wall guard offers a traditional design and provides protection against severe impact from wheeled traffic, with the internal impact bumper providing superior impact absorption. The PVC-u covers are through-coloured and textured to conceal the effects of impact and abrasion. The height of the 700 wall guard provides increased protection over a larger surface area.
Available in 30 colours, the 700 wall guard can be selected in colours that either contrast or harmonise with the surrounding wall covering, depending on the design requirements.
Available from stock in 8 colours - Arctic 101, Muslin 103, Dolphin 106, Pewter 107, Wheat 109, Sherwood 125, Lupin 132 & Willow 187.
Rubber spacers are available for the 700 to add extra depth and to take up minor undulations in the substrate.
The 700 wall guard is also available with 50mm aluminium retainer pieces for a cost effective alternative when the substrate allows – see 700i Infinity option below.
Ideal for use in hospitals, exhibition venues, pharmaceutical facilities, supermarkets, shopping centres, airports, trains and bus stations.
Height: 196mm
Depth: 26mm
Length: 3.66m
Accessories
End Cap: 701 (Universal)
Outside Corner: 702 (90°)
Inside Corner: 707 (90°)
Spacer: 1601
Splice Support: 706
Gradus InPro 700 wall guard comprises a continuous aluminium retainer, internal impact bumper, impact-resistant PVC-u cover and complementary PVC-u accessories including end caps and corners.
The 700 wall guard offers a traditional design and provides protection against severe impact from wheeled traffic, with the internal impact bumper providing superior impact absorption. The PVC-u covers are through-coloured and textured to conceal the effects of impact and abrasion. The height of the 700 wall guard provides increased protection over a larger surface area.
Available in 30 colours, the 700 wall guard can be selected in colours that either contrast or harmonise with the surrounding wall covering, depending on the design requirements.
Available from stock in 8 colours - Arctic 101, Muslin 103, Dolphin 106, Pewter 107, Wheat 109, Sherwood 125, Lupin 132 & Willow 187.
Rubber spacers are available for the 700 to add extra depth and to take up minor undulations in the substrate.
The 700 wall guard is also available with 50mm aluminium retainer pieces for a cost effective alternative when the substrate allows – see 700i Infinity option below.
Ideal for use in hospitals, exhibition venues, pharmaceutical facilities, supermarkets, shopping centres, airports, trains and bus stations.
700i Infinity Wall Guard
Specification
Height: 196mm
Depth: 26mm
Length: 3.66m
Accessories
End Cap: 701 (Universal)
Outside Corner: 702 (90°)
Inside Corner: 707 (90°)
Spacer: 1601
Splice Support: 706i
Gradus InPro 700i Infinity wall guard comprises an aluminium retainer (in 50mm pieces), internal impact bumper, replaceable PVC-u cover and complementary PVC-u accessories including end caps and corners.
The 700i Infinity system features 50mm aluminium retainer pieces for a cost effective alternative when the substrate allows. See 700 wall guard for the continuous retainer option.
The 700i wall guard offers a traditional design, and provides protection against severe impact from wheeled traffic, with the internal impact bumper providing superior impact absorption. The PVC-u covers are through-coloured and textured to conceal the effects of damage whilst the height of the 700i wall guard provides increased protection over a larger surface area.
Available in 30 colours, the 700i wall guard can be selected in colours that either contrast or harmonise with the surrounding wall covering, depending on the design requirements.
Available from stock in 8 colours - Arctic 101, Muslin 103, Dolphin 106, Pewter 107, Wheat 109, Sherwood 125, Lupin 132 & Willow 187.
Ideal for use in hospitals, exhibition venues, pharmaceutical facilities, supermarkets, shopping centres, airports, trains and bus stations.
Height: 196mm
Depth: 26mm
Length: 3.66m
Accessories
End Cap: 701 (Universal)
Outside Corner: 702 (90°)
Inside Corner: 707 (90°)
Spacer: 1601
Splice Support: 706i
Gradus InPro 700i Infinity wall guard comprises an aluminium retainer (in 50mm pieces), internal impact bumper, replaceable PVC-u cover and complementary PVC-u accessories including end caps and corners.
The 700i Infinity system features 50mm aluminium retainer pieces for a cost effective alternative when the substrate allows. See 700 wall guard for the continuous retainer option.
The 700i wall guard offers a traditional design, and provides protection against severe impact from wheeled traffic, with the internal impact bumper providing superior impact absorption. The PVC-u covers are through-coloured and textured to conceal the effects of damage whilst the height of the 700i wall guard provides increased protection over a larger surface area.
Available in 30 colours, the 700i wall guard can be selected in colours that either contrast or harmonise with the surrounding wall covering, depending on the design requirements.
Available from stock in 8 colours - Arctic 101, Muslin 103, Dolphin 106, Pewter 107, Wheat 109, Sherwood 125, Lupin 132 & Willow 187.
Ideal for use in hospitals, exhibition venues, pharmaceutical facilities, supermarkets, shopping centres, airports, trains and bus stations.